Viennese Piano bits

The holes in the feet are formed by aluminium plugs in the mould used to make the waxes; in the case of Ref. 108 the hole passes right through the foot so the plug is longer than the foot. Measurements are approximate since the edges of the plugs are radiused.
Legs are fitted to the feet by first copying the size of the plugs, given above, and then fitting the leg to the foot. Ref.22  can be secured with a screw up through the bottom.

Ref. 95: 
top 18.25mm, depth 45.0, bottom 12.75mm

Ref. 108: Walter
top 13.00mm, depth 45.0, bottom 7.00mm

Ref. 109: Stein 1785 main lid hinge
Shows on inside of lid, 147mm x 25mm

Ref. 125: Stein 1785 flap hinge
                147mm x 25mm

Plain lid hinges for Viennese Grands, fabricated for two thicknesses of spine:

Ref. 124W: Walter 1795
Spine thickness 15mm, width 38mm
Ref. 124F: Fritz
Spine thickness 17mm, width 30mm

Ref. 136: Candle holder and drip-tray on brass swivel; various patterns are available, but this is my favourite. I can supply extra inserts for fitting, so that you can drip wax on more than one instrument.....

Ref. 115 (Fritz)
Ref. 140
Ref. 141 (Graf)

These are all roughly 145mm x 55mm; 
you need them before the plate is made to fit within

Ref. 191
Lozenge shaped version of Ref. 140
123mm x 84mm

Fritz Bitz Ref. 115-120

Ref. 116 Lock Escutcheon
              150mm long

Ref. 117 'Academy scene'
              ~200mm long

Ref. 118 Phoenix 80mm x 40mm

Ref. 119 Lyre  52mm high

Ref. 120 Rosette 40mm diameter

Ref. 121 'Oak leaves' leg decoration 208mm

Ref. 159: leg decoration 
               from Stockholm Fritz

Graf Stuf: Ref. 141-143

Ref. 141 Nameplate frame, see above

Ref. 142 Acanthus leaf decoration
     (either side of the nameplate) 210mm

Ref. 143 Acanthus pattern (keywell cheeks)
               104mm x 78mm

Ref. 144 Lock escutcheon 107mm wide

Ref. 151 Scheidmayer 1815 rosette
              75mm diameter

Ref. 158: lower case edge decoration 
               from Stockholm Fritz 

Ref. 181 Dieudonné & Scheidmayer 1815
              Sunburst rosette 57mm diameter

 Ref. 95   Ref. 108
                                                          

Ref. 85: Schantz c. 1795 Diameter 50 mm

Ref. 100: Walter nameplate bezel
80 mm x 55 mm

Ref. 109

Ref. 125

Ref. 124

Ref. 136

Ref. 115

Ref. 140

|Ref. 141

Ref. 191

Ref. 116

Ref.117

                    Ref. 118                       Ref. 119                Ref. 120

Ref. 121                 Ref. 159

Ref. 142

Ref. 143

Ref. 144

   
                      Ref. 151                                   Ref.158

Ref. 181

HOME